LED UV FOR ROTO GRAVURE

 LED reduces energy consumption by 80%, This is only in the lamp. It also helps to reduce the Ac power consumption

 ✅  An LED-UV system does not generate any heat which saves the cost of spray powder which is approx 2 Kg in 8 hour as the maintenance increases by powder and also cleanliness in the press. The absence of spray powder keeps the press area much cleaner, thus requiring less time cleaning and maintaining the delivery and allowing more time to run proit making jobs. It also saves the space by eliminating the racking of jobs.

✅ There is no need to allocate room for press loads to dry, which will improve the work- low in the production area.

✅ Few MR sheets are used as MR sheets are instantly cured, they can be used multiple times when using a closed-loop system reading the color bar.

✅ No need for aqueous coating. With LED-UV, the days of giving away coatings for free are gone for good! Coatings are used only when they are part of the job design – and paid for by the customer!

✅ Turn times for each job are now determined by the length of the run, allowing increased lexibility downstream and an easier time scheduling jobs.

✅ LED-UV inks tend to be more expensive than conventional inks, however, the cost of ink typically represents only 1% – 2% of the total cost of any print job. LED-UV inks increase the “mileage per kg” of ink especially when printing on offset stocks because LED-UV inks are cured immediately on the surface of the substrate, minimising absorption. #Highest Power LED UV in the World. #No Soldering #Fastest changing chip process #Reliable LED UV System #No down time #Fastest press speeds #Always one step ahead